Rod Floor Section (4-ft x 6-ft)

$559.99
Warranty: 24 Months

Rod Floors are used in Power Tumbling where tumbling is performed on these elevated spring runways that help tumblers propel themselves up high as they demonstrate speed, strength and skill.

SKU:
RF-SECTION
$559.99
Have a question? Contact us.
24 - 60 months leasing available. Apply today.
UPC:
849304007236

A Competition Size Rod Floor is 84-ft (21 sections). They are stiff enough for your bigger athletes, but soft enough to help younger/smaller athletes too. The tubular fiberglass rods ensure a good level of spring with increased safety.

Each section is 6-ft wide x 4-ft long. We recommend  that rods are covered by a layer of Carpet Bonded Foam (1-3/8in) over a layer of 1.875-in to 2-in (50mm) polyethylene (aka Trocellen) foam with Scrim. The Scrim side is placed directly on the rods for these floors. The Scrim will prevent the rods from chewing up or tearing up the bottom of the foam.

Please call 1-800-331-4362 for quotes on carpet foam with scrim, competitive landing mats with landing zones, etc.  

  • Each steel frame section is 8″ (20cm) high, 6′ (1.8M) wide and 4′ (1.2M) long
  • We recommend covering the rod floor with two layers of foam (not included). 

What size is a competition Rod Floor?
A full sized competition Rod Floor is 84-ft long (21 sections)

What size landing mat should be used at the end of a Rod Floor?
Tumbl Trak recommends a landing area of 10-ft wide x 20-ft long x 12-in thick.  

For those who know us best

We're Rated Excellent

Get training tips, newsletter articles, sale alerts and more